As skateboards hanging on the wall with TOTEM

In this video we will see how easy it is to have your skateboards organized with the TOTEM wall mount from PRO MODEL DECK.
NOTE: The bracket incorporates the screws and plugs that will hold it to the wall. We will need a 6mm wall drill. in diameter, a hammer, a star-tipped screwdriver and a tape measure.

First, we present the TOTEM support on the wall at the desired height and mark the upper hole with a point, then we measure from that point down in a straight line 13.5 cm., And mark a point.
If you want to make sure that the two points are in a straight line you can use a spirit level.
We place the 6 mm wall drill. On the machine and we make the drills.
We introduce the plugs in the holes.
We pass the screws through the holes of the TOTEM bracket, and screw it to the wall.
NOTE: It is important that when screwing you check that the screws have been firmly fastened.

"From now on your boards have the place they deserve with the TOTEM support"
Enter PRO MODEL DECK.com now and learn more about our products.

In PRO MODEL DECK your skate is unique.